National 1/32 Aussie V8 Rules - 2018

[Pagey 288]

Hi all,

 

Rules for the 1/32 Aussie V8 for 2018 are attached.

 

Cheers Pagey 

1_32 Aussie V8_2018.pdf

[Peter D 5]

Who supplies the bodies for this class ?

[kart.68 63]

Andrew Bartholomew

[ding 36]

Here is mine that was raced at Narangba. Lowndes Green Eyed Monster.

Cheers

ding...😜

Edited June 20, 2018 by ding

[Nomadman 8]

Been racing them for years in Toowoomba. But with 10T pinion (smaller track) and Pointer motor.

 

[Pagey 288]

 Thanks guys for the input. Great to get feedback on the class . Early testing is showing that it will be a fun , fast class at the Bull Ring . Exactly like the real Aussie V8’s . Will fit perfectly with our Bathurst Weekend. Andrew Bartholomew is the maker of the bodies and they are also available via Cam for our locals . 

 

Cheers Pagey 

[Eagle Racer 8]

Pagey

 

Just a question on the 1/32 Chassis rules,  are the Plafit 1717A Chassis Stabilizer allowed, I can't see them on the photo. Just checking before i install a set. 

 

Vito. 

 

  

[Pagey 288]

 G’day Vito, as the rules state it’s a standard chassis as per out of the box supplied . The stabiliser kit is an up grade so no , not allowed . The aim of the class is keep it simple. Thanks for the questions and interest . Good luck with the build . Looking forward to seeing it on track . 

 

Cheers Pagey 

[Eagle Racer 8]

The nice feeling when you finish a new build, now just have to see if it runs well. 

(Waiting for a motor) for testing added a pointer. 

[Pagey 288]

Great job Vito . Looks very impressive, will stand out on the track for sure . Awesome 👏👍🏻🤓

[Chris1810 19]

Can the front wheels be hardened? All my existing 1/32 chassis have 18.5mm front wheels. 🤔

[Chris1810 19]

Are screws, nuts, and guides of free choice.  

 

Thanks CW.

[Pagey 288]

 G’day mate, yes screws and guides are open . Front wheels size is as per spec . I think it has been set to look correct in wheel arch. Sorry bro 😤

[Chris1810 19]

But could a harden my front with super glue to help get the size up ton19mm?

 

Thanks for your patients.

[Pagey 288]

But of course, as Werner would say ! As long as it is to spec with vernier gauge . Thanks for your understanding. 😂

[Chris1810 19]

Cool.  Thanks Mr Page.😘

[Pagey 288]

    So I finally got my finger out and have finished my first Aussie V8 . Great fun with its first run on the track this afternoon. Looking forward to seeing a full field on track with some closs racing. 

[Sticks 19]

On 8/8/2018 at 11:59 PM, Chris1810 said:

Are screws, nuts, and guides of free choice.  

 

Thanks CW.

 

On 8/9/2018 at 9:10 AM, Pagey said:

 G’day mate, yes screws and guides are open . Front wheels size is as per spec . I think it has been set to look correct in wheel arch. Sorry bro 😤

 

Dose this also include spacers and springs?🤔

Captain

[Pagey 288]

I would say that’s open also . 🧐🤔🤓

[Pagey 288]

  My Aussie V8 team is taking shape . 

[Nomadman 8]

Pagey, where do you get the wheel inserts for the little V8's....

 

Regards, Pete

[Pagey 288]

Cam does them . 🧐👍🏻Mr Slotworx.